Product Reviews | Trail Reviews | Classifieds | Hotlinks | Forums | Races & Events | Gallery | Hot Deals
Home | Forums


MountainBikeReview.com's Forum Archives - Lets Talk about Shocks


Archive Home >> Lets Talk about Shocks(1 2 3 4 5 6 7 8 9 10 11 12 13 )


Air hissing sound from a '02 MARS elite fork (rebound adjust(4 posts)

Air hissing sound from a '02 MARS elite fork (rebound adjustNeD
Jan 11, 2004 1:30 PM
02 mars elite......
I have a funny hissing sound coming from the rebound adjuster when the fork is compressed and it also sounds like air is returning into the fork when it rebounds. Any idea what the problem is? The air chamber is on the opposite side. No oil is leaking either...... any thoughts.....HELP?.........
re: Air hissing sound from a '02 MARS elite fork (rebound adjustchris2fur
Jan 12, 2004 1:33 AM
If you hear the sound even with the rebound knob backed all the way out (ccw from the bottom view--least amount of damping) than something is probably wrong. However, if the sound goes away on the minimum setting, but increases as the rebound damping is increased (with damping increased, the fork returns to extended position more slowly) then it is just the sound of the oil being channelled through the ports to accomplish the damping.

I know when I lost the rebound knob off my SX-R, an actual air hissing sound (as opposed to an oil hissing sound) could be heard on compression and rebound. Manitou said that was normal. When I installed a replacement knob, the air sound went away. Since I use very little rebound damping, I don't hear any noise on compression. If I increase the damping, I will definitely start to hear the oil being "restricted."

Hope this helps.

-Chris
http://www.enduroforkseals.com
re: Air hissing sound from a '02 MARS elite fork (rebound adjustJoeman
Jan 18, 2004 4:35 PM
Check your microlube ports, one is probably stuck open. That happened to my 01 elite and the noise was exactly as you described. Air was infact getting sucked into the lowers as the fork extended after being compressed. Luckily, the solution for me was simple. All I needed to do was cycle the small piston at the center of the post with the end of a small screwdriver. This cleared the obstruction (the smallest stick you could imagine) and the fork worked perfectly afterwards.

-Joe
Yes. That's another possibility I forgot about. (NM).chris2fur
Jan 19, 2004 6:42 AM
 


 MtbREVIEW.com  RoadbikeREVIEW.com  OutdoorREVIEW.com
 PhotographyREVIEW.com  VideogameREVIEW.com  ComputingREVIEW.com
 AudioREVIEW.com  CarREVIEW.com  GolfREVIEW.com
Copyright ©1996-2008 All Rights Reserved.ConsumerREVIEW.com, a division of E-centives, Inc.