|   Paging Tim in WI- my eggbeater spindles don't fit | CKS
Oct 30, 2002 10:46 PM | | Tim,
Please send me an email when you get a chance, One of the Ti spindles you sent doesn't fit in my (L) pedal. Help!?
Thanks,
cksnover@yahoo.com
PS Sorry to post this on the board, but Tim, I've sent you several emails, but you must not be checking your emails... |
| Oh and while yer getting Tim's attention... are you gonna pay... | DeeEight
Oct 31, 2002 7:40 AM | | for the corkies and CORRECT shipping or not? |
| No, Im not.. | Tim in Wi
Oct 31, 2002 8:04 AM | | .. cause the last ones took 33 days to get here.
If your going to be selling them for that much, I can get them locally for about the same.
NKT |
| No problemo | Tim in Wi
Oct 31, 2002 8:08 AM | | I did get your emails, and replied. You said you were going to try and machine them down right? Or do I have the wrong person?
Anyways, the spindles were made in spec with Version 1 of the pedal which used a rubber O-ring for the inboard seal. The new version used a larger hard plastic seal and they removed the "step" from the axle. Two solutions: Remove the hard plastic seal and replace with an O-ring, which is available at any hardware store. OR, the new seal has a inner lip, which can be removed with a exacto-knife. Simply make the inner diameter of this seal slightly bigger, and it will work.
I assume this is the problem you are speaking of. If there is any other problem with them, just return them to me and I will send out another pair.
Thanks!
NKT |
| how's the new C'dale? (nm) | split
Oct 31, 2002 12:38 PM | | |
| That was me | Benno
Nov 1, 2002 10:02 AM | | No, different guy - that was me. I haven't gotten the spindles back from the machine shop yet. |
| No problemo | bruce nelson
Nov 5, 2002 4:01 AM | | while you are at it tim i never recieved the valve stems for tubeless tires i bought earlier this year bontrager race lites |
| |
