|   wheel lacing question | FuFuTripleshot
Jun 11, 2003 6:42 PM | | I'm not sure where I went wrong. At first I thought the guy at the bike shop miscalculated the spoke lengths, but I've verified it through some online spoke length calculators. I have the wheel laced up and all the spokes threaded completely through the nipples at this point and I can still shuffle the hub up and down.
The spokes are the right length for the three cross pattern I have them laced with (or so I think) here's the info if you're smart and bored :)
atomlab aircorps (540 ERD)
Shimano XT disc (HB M755)
My spokes are 258 and 260 mm.
Is that right? Any ideas where I went wrong? |
| Are you sure... | Hardtailforever
Jun 11, 2003 9:01 PM | | Are you sure you did 3-cross and not 2-cross? |
| Good call :) | FuFuTripleshot
Jun 12, 2003 3:05 PM | | I must have misread the lacing instructions somewhere along the line but I ended up with 2 cross.
*this is where somebody less bullheaded would admit to being in over his head and let a bike shop handle it* |
| |
